Change to Heat/Cool modes or turn thermostat Off:
Press System to cycle through Heat, Cool and Off modes. (Off displays blank)
|
Set Current Time and Day
Press Set Clock/Day button
Use Ahead and Back buttons to set time
Press Set Clock/Day button again
Use Ahead and Back buttons to set date
Press Run Program button to save changes
|
COOLING / Weekday Schedule
1) In Cool Mode, press Weekday Schedule
2) Use Ahead and Back buttons to set wake time for Monday - Friday
3) Use Warmer or Cooler buttons to set wake temperature for Monday - Friday
Repeat these steps for: Leaving and returning to the house or going to sleep at night
4) Press Run Program button to save your changes
|
 |
COOLING / Weekend Schedule
In Cool Mode, press Weekend Schedule
Repeat steps 2 and 3 to set wake, leave, return & sleep time for Saturday and again for Sunday
Press Run Program button to save your changes
|
HEATING / Weekday Schedule
In Heat Mode, press Weekday Schedule
Repeat steps 2 and 3 to set wake, leave, return & sleep time for Monday - Friday
Press Run Program button to save your changes
|
HEATING / Weekend Schedule
In Heat Mode, press Weekend Schedule
Repeat steps 2 and 3 to set wake, leave, return & sleep time for Saturday and again for Sunday
Press Run Program button to save your changes
|
To cancel any of these programmed settings,
press CLEAR and re-enter as desired.
|
|
If you have questions or problems, please call
the Energy Optimizer Call Center:
1-866-882-4429.
OR
E-mail the Energy Optimizer mailbox
|
| |
| |
|
|
|
|
|
Important Reminder:
There are three system modes: HEAT, COOL or OFF
If no mode status is displayed,
the system is OFF
The system will NOT automatically change modes
|
|
To Change Fan Control:
Press the Fan button - when "fan" is displayed the fan is ON, otherwise it is on AUTO.
|
|
To change Temperature:
Press the Warmer or Coolerbuttons to adjust temperature temporarily. (You may also press the up or down arrows while cover is closed.) Press Run Program button to end temporary change.
|
|
Holding Temperature:
Press Hold Temp button. Press Warmer or Cooler buttons to adjust, then press Run Program button to end temperature hold.
|
|
To See Your Usage:
Press Usage button for current day. Press Usage button again for cumulative usage. Press Clear button to reset cumulative usage.
|
|
To See Current Temp Setting:
Press Present Setting button.
|
|
